Controller Handles Multiple Hard Drives

NetCell Corp., claims its TurboDisk chip can control up to five hard drives while providing better performance and data protection than RAID Level 5 controllers, at a lower cost.

November 30, 2003

2 Min Read
Network Computing logo

A small startup has crafted a novel controller for high-end gaming and video-editing desktop PCs that use multiple hard-disk drives. NetCell Corp., based here, claims its TurboDisk chip can control up to five hard drives while providing better performance and data protection than RAID Level 5 controllers, at a lower cost. The company foresees a rising class of multimedia and gaming desktops that will use multiple hard drives to handle an explosion of game, photo and video data. NetCell aims to attack a gap in the market for RAID controllers, currently comprising low-end desktop designs with generally low performance and reliability at one end and expensive server-class chips on the other.

The TurboDisk chip uses relatively large 64- or 32-bit word transfers and a dedicated parity hard drive to transfer data quickly, in parallel, across multiple drives. That contrasts with traditional techniques of using 64-kbyte block data transfers, often done serially across one drive at a time, with parity striped across all drives in an array.

NetCell claims its RAID XL mode delivers sustained sequential reads at up to 200 Mbytes/second and sequential writes at up to 110 Mbytes/s, significantly faster than existing RAID 5 controllers. In addition, it claims it offers higher data protection and reliability than RAID 5. The chip's XL mode is similar to RAID Level 3. It also supports standard RAID Levels 0 and 1.

The TurboDisk chip offloads RAID processing from a host CPU. It appears to a Windows 2000 or later operating system like a dual IDE controller accessing a single drive.

NetCell chief executive Andy Mills described the TD6405, the company's first product, as essentially "two large DMA [direct-memory-access] engines and a cache controller." The part, housed in a 608-pin ball grid array, is available now at $79 in lots of 10,000.The initial implementation is on either a 64-bit, 66-MHz PCI card with ports for five ATA drives and 128 Mbytes of cache, or a 32-bit, 66-MHz PCI card controlling three ATA drives with up to 64 Mbytes of cache. A Marvell bridge is available to link to serial ATA drives. "This chip allows us to go to the mainstream market," Mills said.

SUBSCRIBE TO OUR NEWSLETTER
Stay informed! Sign up to get expert advice and insight delivered direct to your inbox
More Insights