SSDs and Understanding Storage Performance Metrics

In the first of a three-part series, Howard Marks describes how storage system throughput is a bad indicator of performance and how SSDs can vastly improve performance, even for entry-level storage systems.

Howard Marks

August 3, 2012

4 Min Read
Network Computing logo

Steven Hill, our resident tummler, left a comment on my recent post on SSDs working their way down to SMB storage devices. He questioned the logic, if not the sanity, of putting SSDs in a storage system that used 1-Gbps Ethernet for server connections. Steve reasoned that the skinny little pipes running out of the Drobo B1200i would be saturated long before the SSD's performance was realized.

The problem with that analysis is storage performance isn't as simple as bandwidth alone. In this, the first installment in a three-part series, we'll discuss the basic storage performance metrics: throughput, IOPS and latency. In the second installment we'll cover how you have to consider IOPS and latency together; in part three, we'll look at how RAID affects performance.

We tend to concentrate on storage network bandwidth because it's the only performance metric that's right there in the system specs. When you buy a disk array or HBA, you know if it has 4-Gbps Fibre Channel or 10-Gbps Ethernet connections. Network bandwidth defines the absolute maximum throughput a storage system can deliver, but very few of us run into throughput limits with our mission-critical applications.

Throughput is the limiting factor for applications that read and write data sequentially in large chunks. These include many media applications like video editing or surveillance and, of course, backup. Backup appliance performance is all about how quickly the appliance can ingest one or more streams of data from the backup servers. As a result, backup appliance spec sheets prominently list ingest rates.

So, while throughput is important, other than backup most of us don't have mission-critical applications doing large sequential data transfers. The applications we want to run faster are almost always some sort of database that reads and writes data more or less randomly in 4-Kbyte or 8-kbyte pages. A typical database transaction will require tens or hundreds of small data accesses as the database searches an index for the right record in each affected table, reads the record in, and then writes it back out with new data in the fields that the transaction changed.

For databases and other random-access applications, throughput is much less important than I/O latency and the number of I/O operations per second (IOPS) the storage system can perform.

Latency is simply the amount of time a device takes to store or retrieve data. On a spinning disk, total latency is the seek time plus the rotational latency as the drive waits for the right block of data to come under the heads, plus the data transfer time.

In a real world, storage system latency can be added as requests travel up and down through the server operating system's I/O stack, cross various network switches and work their way through an array's controller. Synchronous mirroring across data centers is a big source of write latency because data has to be written to both the primary and replication target arrays before the write is acknowledged back to the application. Taken together, these often add enough latency to noticeably affect application performance.

Since today's disk drives have just one head positioner, the number of IOPS a drive can deliver is the reciprocal of its latency. So a 15K RPM drive that has an average total latency of 7 milliseconds can deliver 1/0.007 or 140 IOPS.

SSDs and disk arrays can satisfy some I/O requests from their RAM caches and access their multiple flash chips or disk drives in parallel. This parallelism allows them to deliver more IOPS than their latency would imply. Just as parallelism in storage systems reduces the effect of latency on IOPS applications making requests in parallel, a database server satisfying many requests for many users all at the same time can consume more IOPS than if the application was doing all its work sequentially.

So does it make sense to add SSDs to a storage system with 1-Gbps connections? Sure does, if that storage system is going to run a database application like Oracle, MySQL or even Exchange, all of which manage data in small pages. To saturate even one 1-Gbps connection would take 15,000 8K IOPS, while a 12-drive SATA system without SSD would struggle to deliver 1,500.

Now, Steve does have a point that just sticking a bunch of SSDs into a low-end storage system that doesn't have the CPU, memory or proper software to manage them is a fool's errand.

Performance metrics for some basic storage devices:

Transfer Rate MBps (Read/Write)

Avg Latency ms (Read/Write)

IOPS (Read/Write)

5400RPM Disk




7200RPM Disk




10K RPM Disk




15K RPM Disk




Micron P400e SATA MLC SSD




Micron P320h PCIe SLC SSD




About the Author(s)

Howard Marks

Network Computing Blogger

Howard Marks</strong>&nbsp;is founder and chief scientist at Deepstorage LLC, a storage consultancy and independent test lab based in Santa Fe, N.M. and concentrating on storage and data center networking. In more than 25 years of consulting, Marks has designed and implemented storage systems, networks, management systems and Internet strategies at organizations including American Express, J.P. Morgan, Borden Foods, U.S. Tobacco, BBDO Worldwide, Foxwoods Resort Casino and the State University of New York at Purchase. The testing at DeepStorage Labs is informed by that real world experience.</p><p>He has been a frequent contributor to <em>Network Computing</em>&nbsp;and&nbsp;<em>InformationWeek</em>&nbsp;since 1999 and a speaker at industry conferences including Comnet, PC Expo, Interop and Microsoft's TechEd since 1990. He is the author of&nbsp;<em>Networking Windows</em>&nbsp;and co-author of&nbsp;<em>Windows NT Unleashed</em>&nbsp;(Sams).</p><p>He is co-host, with Ray Lucchesi of the monthly Greybeards on Storage podcast where the voices of experience discuss the latest issues in the storage world with industry leaders.&nbsp; You can find the podcast at:

Stay informed! Sign up to get expert advice and insight delivered direct to your inbox

You May Also Like

More Insights