Special Coverage Series

Network Computing

Special Coverage Series


ARM, AppliedMicro Challenge Intel Xeon

ARM and AppliedMicro have teamed up on the X-Gene server-on-a-chip. Its scale-out design includes fast switch controllers and interconnects to challenge Xeon in large data centers.

It's no secret that ARM is designing server chips. Back in October 2012, ARM provided details on the Cortex A50 and said that AMD, Samsung and Cavium were early customers. Since then, others have licensed the design, including AppliedMicro, which in January talked about its X-Gene chip at Open Compute 2013, the conference hosted by Facebook to promote open systems designs for the data center. As details about the ARM-based chip come to light, it's clear Intel has serious competition for the hearts and minds of data center architects.

AppliedMicro confirmed that it had shipped samples of the X-Gene on April 3, after a story and photos ran on GigaOM.com. The server-on-a-chip design from AppliedMicro is interesting in part because it uses the ARM design and has hit the market before other products from other licensees.

More Insights

Webcasts

More >>

White Papers

More >>

Reports

More >>

What's more interesting is that AppliedMicro's design includes onboard networking, complete with a programmable Ethernet switch controller with an ARM Cortex A5 core at its heart (the same core used in the latest smartphones). By including very fast switch controllers and interconnects on the chip, AppliedMicro has created an ideal chip for high-density servers. By using ARM's 64-bit design as the CPU, it's likely these chips will perform on a par with Intel's Xeon chips. The opens up a new architecture for scale-out server design that to date hasn't been possible.

So far, microserver architectures have shown how a single rack could easily house thousands of lower-powered servers that could be well suited to tasks like scale-out Web services. By using ARM-based chips that consume about 6 watts of power rather than Xeon chips, which will chew up about 100 watts, manufacturers could achieve much greater chip densities within a single enclosure. HP's Moonshot is an example of new architectures that are possible with microservers (though it should be noted the Moonshot 1500, HP's first product out of the gate, is based on Intel's Atom processor).

AppliedMicro has eight cores running at 2.4 GHz, and the ARM design has the advanced features you'd find on an Intel chip, including full hardware virtualization support. As such, it's likely that it will consume a good bit more power than the existing 6 watt ARM chips, but a lot less than the 100 watt Xeon.

[ Join us at Interop Las Vegas for access to 125+ IT sessions and 300+ exhibiting companies. Register today! ]

With an onboard networking switch that can support 10-Gbps Ethernet ports now and 100-Gbps Ethernet ports in future versions, it will be a very attractive building block for Web-based enterprises with truly massive computing and I/O needs like Facebook and Google. With its built-in networking, the X-Gene architecture could knit together over 1,000 cores without the need for an external layer 2/3 switch. Take that, Cisco and Arista!

As the server-on-a-chip name implies, it also supports peripherals through PCI-E 3.0. The internal network of the second-generation chip has a total bandwidth of 160 GB/second.

Intel certainly hasn't been blind to the need for chip-level interconnects that will allow for building massive scale-out computing systems. Last April it bought the networking assets of supercomputer manufacturer Cray. In 2011 it bought Fulcrum Microsystems, which made Ethernet switch chips, and in 2012 it bought QLogic's InfiniBand business. The result is that Intel sees including interconnect logic on the chip, and probably full-blown fabric controllers, too. Some will be InfiniBand, some will be Ethernet, but so far, none have made it to market.

That AppliedMicro has been able to beat Intel to market, or at least to samples with compelling products, shows the power of ARM's licensing strategy. And if AppliedMicro has an interesting spin on the ARM server core, it's a pretty good bet that AMD, Samsung and others have some good ideas, too.

As it turns out, Intel's giving up the smartphone market to ARM was probably as a bad a stumble as large computer manufacturers giving up the PC market to Intel some three decades ago. There's nothing like owning a low-end market to allow chip makers and designers to push into higher and higher-end markets. Now it looks like ARM and its licensees are ready to battle with Intel. The result will be kickass servers.



Related Reading



Network Computing encourages readers to engage in spirited, healthy debate, including taking us to task. However, Network Computing moderates all comments posted to our site, and reserves the right to modify or remove any content that it determines to be derogatory, offensive, inflammatory, vulgar, irrelevant/off-topic, racist or obvious marketing/SPAM. Network Computing further reserves the right to disable the profile of any commenter participating in said activities.

 
Disqus Tips To upload an avatar photo, first complete your Disqus profile. | Please read our commenting policy.
 

Editor's Choice

Research: 2014 State of Server Technology

Research: 2014 State of Server Technology

Buying power and influence are rapidly shifting to service providers. Where does that leave enterprise IT? Not at the cutting edge, thatís for sure: Only 19% are increasing both the number and capability of servers, budgets are level or down for 60% and just 12% are using new micro technology.
Get full survey results now! »

Vendor Turf Wars

Vendor Turf Wars

The enterprise tech market used to be an orderly place, where vendors had clearly defined markets. No more. Driven both by increasing complexity and Wall Street demands for growth, big vendors are duking it out for primacy -- and refusing to work together for IT's benefit. Must we now pick a side, or is neutrality an option?
Get the Digital Issue »

WEBCAST: Software Defined Networking (SDN) First Steps

WEBCAST: Software Defined Networking (SDN) First Steps


Software defined networking encompasses several emerging technologies that bring programmable interfaces to data center networks and promise to make networks more observable and automated, as well as better suited to the specific needs of large virtualized data centers. Attend this webcast to learn the overall concept of SDN and its benefits, describe the different conceptual approaches to SDN, and examine the various technologies, both proprietary and open source, that are emerging.
Register Today »

Related Content

From Our Sponsor

How Data Center Infrastructure Management Software Improves Planning and Cuts Operational Cost

How Data Center Infrastructure Management Software Improves Planning and Cuts Operational Cost

Business executives are challenging their IT staffs to convert data centers from cost centers into producers of business value. Data centers can make a significant impact to the bottom line by enabling the business to respond more quickly to market demands. This paper demonstrates, through a series of examples, how data center infrastructure management software tools can simplify operational processes, cut costs, and speed up information delivery.

Impact of Hot and Cold Aisle Containment on Data Center Temperature and Efficiency

Impact of Hot and Cold Aisle Containment on Data Center Temperature and Efficiency

Both hot-air and cold-air containment can improve the predictability and efficiency of traditional data center cooling systems. While both approaches minimize the mixing of hot and cold air, there are practical differences in implementation and operation that have significant consequences on work environment conditions, PUE, and economizer mode hours. The choice of hot-aisle containment over cold-aisle containment can save 43% in annual cooling system energy cost, corresponding to a 15% reduction in annualized PUE. This paper examines both methodologies and highlights the reasons why hot-aisle containment emerges as the preferred best practice for new data centers.

Monitoring Physical Threats in the Data Center

Monitoring Physical Threats in the Data Center

Traditional methodologies for monitoring the data center environment are no longer sufficient. With technologies such as blade servers driving up cooling demands and regulations such as Sarbanes-Oxley driving up data security requirements, the physical environment in the data center must be watched more closely. While well understood protocols exist for monitoring physical devices such as UPS systems, computer room air conditioners, and fire suppression systems, there is a class of distributed monitoring points that is often ignored. This paper describes this class of threats, suggests approaches to deploying monitoring devices, and provides best practices in leveraging the collected data to reduce downtime.

Cooling Strategies for Ultra-High Density Racks and Blade Servers

Cooling Strategies for Ultra-High Density Racks and Blade Servers

Rack power of 10 kW per rack or more can result from the deployment of high density information technology equipment such as blade servers. This creates difficult cooling challenges in a data center environment where the industry average rack power consumption is under 2 kW. Five strategies for deploying ultra-high power racks are described, covering practical solutions for both new and existing data centers.

Power and Cooling Capacity Management for Data Centers

Power and Cooling Capacity Management for Data Centers

High density IT equipment stresses the power density capability of modern data centers. Installation and unmanaged proliferation of this equipment can lead to unexpected problems with power and cooling infrastructure including overheating, overloads, and loss of redundancy. The ability to measure and predict power and cooling capability at the rack enclosure level is required to ensure predictable performance and optimize use of the physical infrastructure resource. This paper describes the principles for achieving power and cooling capacity management.