Network Computing is part of the Informa Tech Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Blog: Cisco Adds SIP to Call Manager, Finally

Next month, Cisco will introduce the next release of Call Manager, version 5.0, at the VoiceCon show in Orlando. Lots of changes are to be expected, including support for Linux in addition to Windows Server, and finally support for SIP clients.

That last fact is a big deal. Unless you've been comatose for the past few years or otherwise blissfully ignorant of the VoIP industry, you know Call Manager is the only major IP PBX to not offer SIP client support. Cisco has offered SIP trunking and offers a SIP server for the carrier market, but has no such offering for the enterprise.

The official reason, according to Cisco, is that SIP isn't mature enough for the enterprise. But the scuttlebutt says that 18 months ago internal politics at Cisco killed the SIP efforts to produce an enterprise-class SIP server. Fingers pointed to Marthin DeBeer, then Cisco’s vice president and general manager, and Richard Platt, then Cisco’s vice president of engineering, for eliminating Dreadnaught, a prototype enterprise SIP server. The two were responsible for Call Manager's development and supposedly were threatened by the Dreadnaught team’s ability to add 80 percent of Call Manager's ability within six months, or so the rumors go.

Adding features to CCM has been cumbersome. It took two years to add Music on Hold, for example. Even today, CCM uses its own Skinny Client Control Protocol (SCCP), which lacks presence and isn't well suited for a distributed architecture.

  • 1