05:00 AM
Connect Directly

How-To: Plan an iSCSI SAN

Think you're ready to build that iSCSI SAN? We give you tips on how to plan and configure it for enterprise success -- from paths to NICs to switches.

Which Switch?

I've used a consumer-grade Gigabit Ethernet switch in demonstrations of iSCSI technology and run iSCSI on a 10-Mbps Ethernet hub just for grins. But don't try this at the office or at home. Consumer switches typically don't support wire-speed connections between multiple ports, so they may drop packets without warning.


We've seen a low-end, 24-port switch with two, 12-port switch engines and a single-gigabit connection between them. But if you put your servers on ports 1 through 16 and place your disk arrays on ports 18 through 24, that single-gigabit connection will get overloaded, resulting in packet loss and a huge performance hit (or worse).

Your iSCSI SAN should use an enterprise-class, nonblocking, Gigabit Ethernet switch, such as one from Extreme Networks or Foundry Networks. And given the homicidal thoughts that run through my head when my BlackBerry buzzes at 4 a.m., spring for the dual, redundant power supplies, too.

2 of 9
Comment  | 
Print  | 
More Insights
Audio Interviews
Archived Audio Interviews
Jeremy Schulman, founder of Schprockits, a network automation startup operating in stealth mode, joins us to explore whether networking professionals all need to learn programming in order to remain employed.
White Papers
Register for Network Computing Newsletters
Current Issue
Twitter Feed