Special Coverage Series

Network Computing

Special Coverage Series

Commentary

Amy Arnold
Amy Arnold Network Computing Blogger

Why I Won't Hire You: 3 Interview Mistakes Network Engineers Make

Here's advice on what not to do during an interview, from an engineer who has been on both sides of the interview table.

Interviewing has never been a problem for me. In fact, I’ve gotten nearly every IT job I’ve ever applied for, even at the beginning of my career when my skills were green and guts were a large portion of what I had to rely on.

After interviewing many candidates for IT positions over the years, however, it’s clear to me that many engineering professionals' interviewing aptitude is less than stellar. I’d compare the interviewing skills of many of these candidates to the sucking power of a black hole as opposed to the rising star they would like to be seen as.

Here are three interview mistakes I've seen network engineers commonly make:

1. Failure to make eye contact. Yes, I know you are likely an introvert with substandard communication skills. This does not come as a surprise. If you were a person who loved the spotlight and thrived off interaction with people, you probably wouldn’t be interested in my slightly less glamorous network engineering role.

However, direct eye contact tells me you have the emotional maturity to overcome your hermit tendencies when required. The interviewer needs to know you can handle yourself even outside your comfort zone, and you only have one opportunity to prove it. So stop looking down at your papers, up at the ceiling, or over all the walls. Shake off the social awkwardness and look your interviewer in the eyes if you want to get the job.

2. Faking your skill set. This one will earn you major penalty points, so just don’t do it. If it’s on your application and you don’t know it, you are wasting the interviewer’s time and earning his/her resentment. Claiming skills you don’t have calls into question your integrity, and for that alone I wouldn’t hire you.

Does this mean you can’t try for a job you don’t have the strongest skill set in? Absolutely not; just be honest about it. Be ready to make a case for your learning aptitude and present the experience you do have. Will you get the job without the BS? Maybe not. But some chance is better than no chance if you compromise your integrity.

[Learn two key steps that can help make the difference between a short, unhappy stint and a long, successful career in networking in "Advice To New Network Engineers."]

3. Talking too much. I am often surprised at how often I encounter this one, but if you are a chatty pants, you need to learn when to zip it. Yes, as an interviewer, I want more than yes or no answers from you, the candidate. However, I am definitely not looking for a dissertation on your philosophy of life, nor am I particularly interested in a recollection of every moment you deemed significant since birth.

Give the interviewer a two- to three-minute response to a question. See if he/she prompts you to continue. If not, consider your answer sufficient and let the process move along. Being unaware of your own prattling tells me that you have no idea of your impact on others and that’s just not IT team material.

In addition to avoiding the mistakes listed above, here's something else to keep in mind in order to improve your odds of winning the job: IT managers are looking for quality thinkers. While you need to bring technical skills to the table, showing that you are an organized problem solver gives you the edge. Every answer you give in an interview should reinforce that quality. If you do that, you’ll find you get many more offers than rejections.



Related Reading


More Insights



Network Computing encourages readers to engage in spirited, healthy debate, including taking us to task. However, Network Computing moderates all comments posted to our site, and reserves the right to modify or remove any content that it determines to be derogatory, offensive, inflammatory, vulgar, irrelevant/off-topic, racist or obvious marketing/SPAM. Network Computing further reserves the right to disable the profile of any commenter participating in said activities.

 
Disqus Tips To upload an avatar photo, first complete your Disqus profile. | Please read our commenting policy.
 

Editor's Choice

Research: 2014 State of Server Technology

Research: 2014 State of Server Technology

Buying power and influence are rapidly shifting to service providers. Where does that leave enterprise IT? Not at the cutting edge, thatís for sure: Only 19% are increasing both the number and capability of servers, budgets are level or down for 60% and just 12% are using new micro technology.
Get full survey results now! »

Vendor Turf Wars

Vendor Turf Wars

The enterprise tech market used to be an orderly place, where vendors had clearly defined markets. No more. Driven both by increasing complexity and Wall Street demands for growth, big vendors are duking it out for primacy -- and refusing to work together for IT's benefit. Must we now pick a side, or is neutrality an option?
Get the Digital Issue »

WEBCAST: Software Defined Networking (SDN) First Steps

WEBCAST: Software Defined Networking (SDN) First Steps


Software defined networking encompasses several emerging technologies that bring programmable interfaces to data center networks and promise to make networks more observable and automated, as well as better suited to the specific needs of large virtualized data centers. Attend this webcast to learn the overall concept of SDN and its benefits, describe the different conceptual approaches to SDN, and examine the various technologies, both proprietary and open source, that are emerging.
Register Today »

Related Content

From Our Sponsor

How Data Center Infrastructure Management Software Improves Planning and Cuts Operational Cost

How Data Center Infrastructure Management Software Improves Planning and Cuts Operational Cost

Business executives are challenging their IT staffs to convert data centers from cost centers into producers of business value. Data centers can make a significant impact to the bottom line by enabling the business to respond more quickly to market demands. This paper demonstrates, through a series of examples, how data center infrastructure management software tools can simplify operational processes, cut costs, and speed up information delivery.

Impact of Hot and Cold Aisle Containment on Data Center Temperature and Efficiency

Impact of Hot and Cold Aisle Containment on Data Center Temperature and Efficiency

Both hot-air and cold-air containment can improve the predictability and efficiency of traditional data center cooling systems. While both approaches minimize the mixing of hot and cold air, there are practical differences in implementation and operation that have significant consequences on work environment conditions, PUE, and economizer mode hours. The choice of hot-aisle containment over cold-aisle containment can save 43% in annual cooling system energy cost, corresponding to a 15% reduction in annualized PUE. This paper examines both methodologies and highlights the reasons why hot-aisle containment emerges as the preferred best practice for new data centers.

Monitoring Physical Threats in the Data Center

Monitoring Physical Threats in the Data Center

Traditional methodologies for monitoring the data center environment are no longer sufficient. With technologies such as blade servers driving up cooling demands and regulations such as Sarbanes-Oxley driving up data security requirements, the physical environment in the data center must be watched more closely. While well understood protocols exist for monitoring physical devices such as UPS systems, computer room air conditioners, and fire suppression systems, there is a class of distributed monitoring points that is often ignored. This paper describes this class of threats, suggests approaches to deploying monitoring devices, and provides best practices in leveraging the collected data to reduce downtime.

Cooling Strategies for Ultra-High Density Racks and Blade Servers

Cooling Strategies for Ultra-High Density Racks and Blade Servers

Rack power of 10 kW per rack or more can result from the deployment of high density information technology equipment such as blade servers. This creates difficult cooling challenges in a data center environment where the industry average rack power consumption is under 2 kW. Five strategies for deploying ultra-high power racks are described, covering practical solutions for both new and existing data centers.

Power and Cooling Capacity Management for Data Centers

Power and Cooling Capacity Management for Data Centers

High density IT equipment stresses the power density capability of modern data centers. Installation and unmanaged proliferation of this equipment can lead to unexpected problems with power and cooling infrastructure including overheating, overloads, and loss of redundancy. The ability to measure and predict power and cooling capability at the rack enclosure level is required to ensure predictable performance and optimize use of the physical infrastructure resource. This paper describes the principles for achieving power and cooling capacity management.