Special Coverage Series

Network Computing

Special Coverage Series

Commentary

Ethan Banks

Cisco Catalyst 6800: Same Game, New Name

Cisco touts its new Catalyst 6800 switch line as a game changer, but it’s really designed to satisfy Catalyst 6500 customers without changing much at all.

The Ethernet switch market is saturated with choices. Lots and lots of choices. Cisco adds three more options today with the announcement of the Catalyst 6800 family. While Cisco touts the switch line as a game changer, it's really designed to satisfy Cisco's massive customer base of Catalyst 6500 owners.

The 6800 series is an evolution of the 6500 family, though there isn't a one-for-one 6500-to-6800 replacement--as in you can't order a 13/9/6/4/3 slot chassis. But there are useful options out of the gate.

At the top end is the 6807XL, which has a new seven-slot chassis that can use some of the existing line cards from the 6500. You get as much as 880 Gbps per slot, for a total 11.4 Tbps maximum capacity. Cisco says the 6807XL will offer service modules that allow firewalling, wireless LAN control, network analysis and other features to be baked right into the chassis.

Cisco 6807 XL
Cisco 6807 XL
Photo: Cisco

The existing install base of 800,000 6500 chassis was a chief driver for this box; the 6807XL gives customers an easy migration path to more bandwidth.

Cisco believes chassis-based service modules will be a big differentiator for the 6500/6800 in the marketplace, but I disagree. The rise of the smart, virtualized network edge makes me doubt service modules have much of a future.

[Check out Ethan Bank's series on configuring Nexus 5500s, including "How To Configure Cisco Nexus 5500 Port Channels."]

Cisco also announced the 6880X, a partially fixed-configuration switch that lets mid-market customers get into higher-density 10 Gbps cheaply. The 6880X has 16 10/1-GbE fixed ports with four slots to allow for expansion; each slot is capable of 200 Gbps and up to 800 Gbps for the entire chassis. Translating the marketing speak, that means you've really got 100 Gbps per slot in a single direction, or about a 1.6-to-1 oversubscription.

Cisco 6880X
Cisco 6880X
Photo: Cisco

In other words, this switch is capable, but does not have a non-blocking fabric. If the point of this switch has you scratching your head a bit, yes, clearly there are other switches with bountiful 10 G capacity in Cisco's lineup (Nexus 5500 and Catalyst 4500X, for instance). The fact is, the 6880X is positioned as a budget-conscious choice for the smaller enterprise.

The 6800ia is the third switch in the new line. It's a unique device. The "ia" stands for "instant access." The switch has 48 ports of 1GbE and can connect to any 6500 or 6800. When connected to the right core 6800, the "ia" inherits all the capabilities of the core switch. The core 6800 and attached 6800ia switches act as a distributed stack, with zero configuration of the "ia" switches required of the network administrator.

Cisco 6800ia
Cisco 6800ia
Photo: Cisco

The point of this switch is to provide understaffed IT shops with a simple way to manage a campus environment. A 6800 core switch can connect to as many as 20 6800ia switches, providing roughly 1,000 ports that are managed from a single point. No special cabling is required to achieve this, as the uplinks are through standard 10-GbE ports dedicated to uplink duties.

The Game Remains the Same

Cisco is marketing its new switches, and a few a few other (less interesting) product refreshes of the ASR1000 and ISR router platforms, as a "gamechanger" (complete with Twitter hash tag).

This is a textbook example of hyperbole. Cisco is changing nothing whatsoever. In fact, the greatest driver for these switches was the clamor from customers who want to keep everything the same. So, folks buying the Catalyst 6800s are going to get exactly that: more of the same.

• Do you want a switch that protects your 6500 investment? Done. You don't have to change all of your line cards.

• Do you want a switch that runs the same monolithic IOS you have today? Done. Your operations can continue without any change at all.

• Do you want a switch you can get about 10 years out of while running all the features of the 6500 one day one? Done. You've got the entire kitchen sink of the 6500 IOS delivered on the new 6800 boxes.

In short, Cisco is bringing to market faster switches in the 6800. This doesn't mean they're better, and they certainly aren't game changers. Rather, it means that if you're a customer who likes to maintain the network status quo, your ship is arriving in the form of the 6800 line, which is expected to be available at the end of the year.

Expansion Plans

I'd prefer to see Cisco consolidate its switching family. By offering a limited selection of capable hardware, Cisco could fully support each product rather than spread its resources across a diverse range of micro-targeted boxes. There's really no point in adding a new switch line to the existing family of Catalyst 2000s, 3000s, 4000s and 6000s, not to mention the expanding Nexus product line.

I know the Catalyst 6500E is the go-product for lots of Cisco customers, but not for me. Why? Because for the money, the 6500E with the Sup2T was too much money for not enough potential bandwidth. You just can't fit a lot of 10GbE ports in a 6500E (at least, not at an oversubscription rate you'd want), which even in a small installation is a limiting factor. So I was done with it, outside a limited role at the access layer or a small office deployment.

Instead, I prefer the Nexus product line within the Cisco portfolio because you can accomplish an awful lot by pairing Nexus 2000-series Fabric Extenders with 5500s or 7000s. I also like the modularity of the NX-OS, and I find the Nexus CLI preferable to that of the IOS.

Is this a perfect solution? Perhaps not. Is it as full-featured as the Catalyst line? Not as such. But with bandwidth to burn, the basics down pat, and interesting new features like vPC, OTV and FabricPath in the mix, the Nexus and I are friends, for better or worse.

But that's me. If you're a Catalyst 6500 shop, sit tight on that Nexus purchase order, and see how the new 6800 product set lines up with your upcoming projects and budget line items. You'll be able to do everything you do today, and drop fewer frames while you're at it. Maybe that's not a game changer, but it's not all bad.



Related Reading


More Insights



Network Computing encourages readers to engage in spirited, healthy debate, including taking us to task. However, Network Computing moderates all comments posted to our site, and reserves the right to modify or remove any content that it determines to be derogatory, offensive, inflammatory, vulgar, irrelevant/off-topic, racist or obvious marketing/SPAM. Network Computing further reserves the right to disable the profile of any commenter participating in said activities.

 
Disqus Tips To upload an avatar photo, first complete your Disqus profile. | Please read our commenting policy.
 

Editor's Choice

Research: 2014 State of Server Technology

Research: 2014 State of Server Technology

Buying power and influence are rapidly shifting to service providers. Where does that leave enterprise IT? Not at the cutting edge, thatís for sure: Only 19% are increasing both the number and capability of servers, budgets are level or down for 60% and just 12% are using new micro technology.
Get full survey results now! »

Vendor Turf Wars

Vendor Turf Wars

The enterprise tech market used to be an orderly place, where vendors had clearly defined markets. No more. Driven both by increasing complexity and Wall Street demands for growth, big vendors are duking it out for primacy -- and refusing to work together for IT's benefit. Must we now pick a side, or is neutrality an option?
Get the Digital Issue »

WEBCAST: Software Defined Networking (SDN) First Steps

WEBCAST: Software Defined Networking (SDN) First Steps


Software defined networking encompasses several emerging technologies that bring programmable interfaces to data center networks and promise to make networks more observable and automated, as well as better suited to the specific needs of large virtualized data centers. Attend this webcast to learn the overall concept of SDN and its benefits, describe the different conceptual approaches to SDN, and examine the various technologies, both proprietary and open source, that are emerging.
Register Today »

Related Content

From Our Sponsor

How Data Center Infrastructure Management Software Improves Planning and Cuts Operational Cost

How Data Center Infrastructure Management Software Improves Planning and Cuts Operational Cost

Business executives are challenging their IT staffs to convert data centers from cost centers into producers of business value. Data centers can make a significant impact to the bottom line by enabling the business to respond more quickly to market demands. This paper demonstrates, through a series of examples, how data center infrastructure management software tools can simplify operational processes, cut costs, and speed up information delivery.

Impact of Hot and Cold Aisle Containment on Data Center Temperature and Efficiency

Impact of Hot and Cold Aisle Containment on Data Center Temperature and Efficiency

Both hot-air and cold-air containment can improve the predictability and efficiency of traditional data center cooling systems. While both approaches minimize the mixing of hot and cold air, there are practical differences in implementation and operation that have significant consequences on work environment conditions, PUE, and economizer mode hours. The choice of hot-aisle containment over cold-aisle containment can save 43% in annual cooling system energy cost, corresponding to a 15% reduction in annualized PUE. This paper examines both methodologies and highlights the reasons why hot-aisle containment emerges as the preferred best practice for new data centers.

Monitoring Physical Threats in the Data Center

Monitoring Physical Threats in the Data Center

Traditional methodologies for monitoring the data center environment are no longer sufficient. With technologies such as blade servers driving up cooling demands and regulations such as Sarbanes-Oxley driving up data security requirements, the physical environment in the data center must be watched more closely. While well understood protocols exist for monitoring physical devices such as UPS systems, computer room air conditioners, and fire suppression systems, there is a class of distributed monitoring points that is often ignored. This paper describes this class of threats, suggests approaches to deploying monitoring devices, and provides best practices in leveraging the collected data to reduce downtime.

Cooling Strategies for Ultra-High Density Racks and Blade Servers

Cooling Strategies for Ultra-High Density Racks and Blade Servers

Rack power of 10 kW per rack or more can result from the deployment of high density information technology equipment such as blade servers. This creates difficult cooling challenges in a data center environment where the industry average rack power consumption is under 2 kW. Five strategies for deploying ultra-high power racks are described, covering practical solutions for both new and existing data centers.

Power and Cooling Capacity Management for Data Centers

Power and Cooling Capacity Management for Data Centers

High density IT equipment stresses the power density capability of modern data centers. Installation and unmanaged proliferation of this equipment can lead to unexpected problems with power and cooling infrastructure including overheating, overloads, and loss of redundancy. The ability to measure and predict power and cooling capability at the rack enclosure level is required to ensure predictable performance and optimize use of the physical infrastructure resource. This paper describes the principles for achieving power and cooling capacity management.