Gunter Van de Velde, senior technical leader, IPv6, with Cisco and chair of IPv6 Council-Belgian Chapter, says, "The good news is that the equipment interoperates extremely well, and the problems with particular operating systems are well-known. We spent a lot more time getting people familiar with IPv6. Once you know it, configuring for IPv6 is no harder than IPv4."
InteropNet is in a somewhat unique position: A new network is built out for every show, meaning there are no legacy equipment restraints nor concerns about growing the network over time. The Interop team sets up and tears down the network in about 45 days. However, InteropNet also has to support a variety of devices from exhibitors and show attendees. You may not have the luxury of being able to create your networks from scratch, but as Van de Velde points out, transitioning to IPv6 provides an opportunity to take what you have learned managing IPv4 and better plan your IPv6 address space along logical lines.
InteropNet's IPv6 addressing is based, in part, on taking the address allocation received from ARIN and mapping existing hexadecimal equivalent IPv4 subnets into the network portion of the IPv6 address. IPv4 subnets and corresponding IPv6 subnets are then run concurrently. IPv6 hosts will either be statically configured (such as critical servers like DNS, syslog, etc.), or hosts will use IPv6 auto-config with EUI-64 to set-up their addressing. EUI-64 conversion expands a 48-bit MAC address to 64 bits by inserting 16 bits "FFFE" between the OUI and NIC portions of the MAC address. EUI64 ensures that the host portion of the IPv6 address is unique during auto-config.
Host addressing will also use stateless auto-config. Auto-config relies on routers sending out router advertisements that provide IPv6 addressing and subnet masks. Auto-config uses the network information sent from the router advertisement and the EUI-64 address based on the hosts' own MAC address to create a full IPv6 address.DHCPv6 is used to tell hosts where critical servers are, such as DNS and network time--something that isn't transmitted in router advertisements. To protect the IPv6 from rogue router advertisements, which are used to create man-in-the-middle situations, RA-Guard, a feature found on many modern IPv6 capable switches, will allow router advertisements only from specific ports and block all the rest.