Cisco calls it Clean Air. Aruba calls it Spectrum Analysis. And no doubt, the rest of the market will follow with their own versions. What is so exciting about this latest wave of wireless utilities? Basically, they act as force-multipliers. By equipping each access point installed with high-end WLAN spectrum analysis, classification and recording capabilities, You-The-Admin have now become You-The-All-Seeing-Admin. From your management console, you will have better intelligence than is typically gathered by sending even a sharp technician afield when RF issues are suspected to be affecting performance issues.
Simply put, everywhere you have an AP, you have a spectrum analyzer that can be leveraged from the central management system. In my world, that means I have potentially 2,500 or so spectrum analyzers working for me, if I use either Cisco or Aruba's product sets. Cisco takes it up a notch a separate chipset onboard their APs, specifically for dedicated RF analysis and the ability to differentiate things like the model of cordless phone causing the trouble. This is why their 3500-series 802.11n APs recently won Best of Interop for Wireless & Mobility. The 3500s can also serve clients as they simultaneously do analysis. Slick.
Can you have too much of a good thing? It's a fair question as this sort of intelligence gathering is bought and distributed. Given that 802.11n is predicted to be an Ethernet-killer, having healthy, noise-free air gets all the more important, especially where high-bandwidth and critical applications are moved to the radio side of life. At first blush, the thought of high-end, reliable, on-demand cell quality quantification is almost intoxicating in its appeal. But after the initial warm-fuzzy fades, it's OK to ponder if this new capability brings any baggage.
Let's use Syracuse University as an example. With a campus bordered by three hospitals, residential neighborhoods and a number of businesses, we see a lot of "edge interference" that we can only catalog and then ignore; it is all unlicensed spectrum, after all. Even though we do a pretty impressive job of reigning in rogue (self-installed) wireless access points and routers, we still have a running meteor shower of transient noise and interference sources within our borders. We know of dozens of RF-based classroom response systems, Zigby-style building sensor networks and research projects using the same 2.4 and 5 GHz spectrums used by our access points and clients.