We liked the SANbox 2's design and construction, which reminded us of QLogic's SANblade 2300 Fibre Channel HBAs (host bus adapters). The insides are simple, with a single integrated chip for all ports.
This switch bested the competition in the majority of our tests; its performance on our latency and throughput tests really impressed us. In all but the full-mesh latency tests (which McData mostly won), the SANbox 2 had the best numbers. Latency, particularly on our latency-under-load tests, was evenly distributed. Only the SANbox 2 put out such even scores, a tribute to the switch's superior design. Furthermore, in the more challenging latency-under-load test, the SANbox2 behaved as consistently and predictably as it did in the standard latency tests.
The SANbox 2 also proved the clear throughput leader. QLogic's switch handled the smallest frame size better than the other switches. This result bodes well for the SANbox 2, as much of a Fibre Channel SAN's message traffic tends to be on the small side.
QLogic's SANbox 2 comes with SANmanager management software, an independent Java-based application. Although we rated the software's interface and simplicity last among the three products' management tools, it was still easy to use. Both McData and Brocade use browser-based implementations, a smarter approach than SANmanager, which has to be installed on each machine you wish to use as a manager.
QLogic's switch is respectably priced, right in the middle of our pack, with a $17,995 list price and $17,935 street price. The QLogic SANbox 2 comes with a one-year warranty. Extended warranty and service is available. This is a solid product from a solid company that is committed to the storage industry in all aspects.
SANbox2 16 Port Fibre Channel Switch, $17,995. QLogic Corp., (877) 975-6442, (949) 389-6000. www.qlogic.com
McData Corp. Sphereon 4500
The McData Sphereon 4500 replaces the Sphereon 3216 in McData's midrange lineup. This new switch has the best price, with an intriguing pay-as-you-go plan; however, our tests showed that McData needs some improvement in both throughput and latency.
Unlike its two competitors, McData equips its 2-gigabit Fibre Channel switch with 24 fixed ports, rather than 16. However, the company sells the box for use in eight-port, 16-port, or 24-port configurations. A license key activates the unit in those eight-port increments. Such a port scheme provides good investment protection if you're installing a nascent SAN and are unsure of its growth potential.
The Sphereon 4500 has two hot-swappable power supplies/cooling assemblies. Unlike the SANbox 2, however, these units are removable from the rear, rather than the front, of the machine. An Ethernet management port resides on the unit's front, to the left of the Fibre Channel ports. The Sphereon 4500 is also one of two single-chip designs in our test. With its single 24-port chip, McData has designed the insides of this box cleanly.
The outside, however, is another story. The Sphereon 4500 is numbered right to left in a double row, with the zero port on the bottom right, rather than the more conventional left to right. McData tells us that the numbering is an engineering legacy; that's how all its past switches were numbered. We understand that, but nothing else with ports is numbered like that--and with good reason: It's a stupid idea, and needs to be changed on future switches.
Although the Sphereon 4500 posted some good full-mesh latency test results, it came in last on the standard port-to-port latency and latency-under-load tests. We find the throughput results particularly disappointing, since we tested only 16 ports on this switch, rather than the full 24-port complement. While this result might indicate an early firmware problem, it's still a concern. The Sphereon 4500 should perform better than it does. On the latency front, the Sphereon 4500 seemed to perform well only while under load. Industry-standard latency performance and latency-under-load tests were not exactly what we expected either. However, the Sphereon 4500 performed very well on the full-mesh latency tests. We can only surmise that because McData's single chip design is newest, the speed of the RAM used for buffer credits must be superior to that of QLogic or Brocade. Superior RAM speed would have a positive effect on latency scores.
The Sphereon 4500 comes with SANpilot, a browser-based configuration- and fabric-management utility. SANpilot is the easiest configuration utility to use, though it has fewer features than Brocade's browser-based software. Unlike the others, this switch features nondisruptive code load, called HotCAT, a feature that's normally reserved for director-class switches. This handy feature lets new code be loaded to the switch and activated without disrupting traffic passing through the switch.
McData sells the Sphereon 4500 through its channel partners and offers a 13-month warranty on the switch. We had to ask: Why 13 months? McData said it was a customer courtesy, as most people end up having the switch sitting for a month before implementation. Nice. Almost nice enough to make up for the stupid port-numbering trick.
Because this article was written so close to the release date for the Sphereon 4500, we were unable to secure street prices for the switch. We estimate street prices to be 10 percent to 20 percent less than list. The list price, $15,000 for the 16-port version, includes optics, and the list price for the 24-port activated version of the Sphereon 2500 is a couple of thousand less than the street price of the 16-port Brocade SilkWorm 3800. McData offers an incentive to purchase the Sphereon 4500 at the 24-port activated price of $21,695 (list). It's far cheaper to purchase the ports up front, as each eight-port upgrade sells for $9,959.
Sphereon 4500 Fabric Switch, $21,695 fully populated including optics, McData Corp., (800) 545-5773, (303) 460-9200. www.mcdata.com
Brocade Communication Systems SilkWorm 3800
Brocade dominates the midrange Fibre Channel switch market, and the SilkWorm 3800 has many features and a strong GUI. It's a bigger unit than the competitors' switches, and its ports are set in a single row, sensibly numbered from left to right. Perhaps these facts alone justify the SilkWorm 3800's $25,000 street price, because the unit's performance, while mostly fine, doesn't bear out the premium over QLogic's and McData's prices.
Our SilkWorm 3800 turned in some incongruous test results. At very small frame sizes, Brocade had both latency and throughput problems. Furthermore, when we ran our full-mesh latency test, the numbers were appalling. The latency at maximum frame size was seven to eight times that of the Sphereon 4500 and SANbox 2, respectively. At the smallest frame size, latency was 85 times that of the Sphereon 4500 and 211 times that of the SANbox 2.
Brocade's representative said the numbers we got at 100 percent load measured buffer latency. He added that the switch has extra buffer credits that are dynamically allocated, and as such, the sending device does not need to throttle in response to a lack of buffer credits. Instead, the originator can use the extra credits to keep sending data, and the latency will occur at the switch. Brocade characterizes this arrangement as a benefit, and claims that SANs with 300 or more nodes can see a performance increase from this dynamic buffering. That explanation sounded plausible, but when we tested further, on uncongested ports with the rest of the switch under 100 percent load, our results didn't improve. Nothing in our testing indicated Brocade's dynamic buffering is a measurable benefit. That leaves us with an unsubstantiated vendor claim.
At larger frame sizes, the SilkWorm's throughput was close to that of the QLogic SANbox2 and beat the McData switch. It ran into problems with small frame sizes, which is a concern, though not an overriding one.
We really liked Brocade's browser/Java-based configuration and management tool. It had a series of easy-to-use screens that we found intuitive enough to get simple tasks done, but also with a deeper level of complexity that let us handle even the most complex tasks in switch setup and maintenance. It was a fast, stable interface that other companies should look at.
This Brocade switch enjoys a wide range of certifications on many different pieces of SAN hardware. Brocade offers a one year warranty on its switch and on-site service and support packages to ensure data reliability. However, with a list-price range of up to $30,000, the SilkWorm falls short on bang for the buck.
Brocade SilkWorm 3800 Enterprise Fabric Switch, $18,000 to $30,000 depending on final configuration, Brocade Communication Systems, (408) 487-8000. www.brocade.com
Steven J. Schuchart Jr. covers storage and servers for Network Computing. Previously he worked as a network architect for a general retail firm, a PC and electronics technician, a computer retail store manager, and a free-lance disc jockey. Write to him at sschuchart@nwc.com.
RSS
Built for easy access inside and out, the SANbox 2 is a 16-port, 1U, 2-gigabit Fibre Channel switch with dual power supplies set up in a redundant configuration. Power cords plug into the front of the switch, and the power supplies are hot-swappable. Forget the trip to dust-bunny land after a power failure; if a power supply fails, pull it right out of the front. The ports are laid out in two rows of eight, with both GBICs (gigabit interface converters) backing each other so the release for the optical cables is on the bottom. This layout makes it easy to remove cables. The front also features a link light, fan and temperature lights and a "heartbeat" that indicates the switch is working properly.
